Don: Thanks again. Good news. And thanks for the hint I do have the k60xv to install so this is a big help. I am kind of going by guess and by golly on what order I install things. I have started with the KAT2 and had planned to move to the SSB2, but I may do the 160m accessory first. Suggestions always appreciated.
73's Chris Don Wilhelm wrote: > > Chris, > > Unless you are really careful with your DMM leads and have zeroed your > DMM, *any* reading of .001 volts (or even up to .003) can be considered > zero under normal conditions because it is likely noise being coupled > onto the DMM leads from sources unknown. > > So, yes, that is close enough to zero. > > Additional hint: if you are ever going to install the K60XV, use a 470 > ohm resistor at the R6 location rather than the 47 ohm value. If you > have the K60XV in hand, you will find an extra 470 ohm resistor just for > that purpose packaged with the kit. > > 73, > Don W3FPR > > MTcja wrote: >> After listening for a while and reviewing basic and advanced operation I >> am >> now beginning the install of the K2 accessories. For the KAT2 I am >> getting >> .001 V at U4/PIN 1. Is this "close enough" to zero? If not, please >> advise >> the best way to trace back the origin of this voltage. BTW, in TUNE I am >> at >> 3.8. Thanks. >> >> > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://www.nabble.com/KAT2-INSTALL---VOLTAGE-AT-U4%2C-PIN1-tp17115482p17116537.html Sent from the K2 mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
