If using this in a contest you will have to make sure your filter passband is 
quite 
narrow.  If there are multiple signals within the passband it will not know 
which 
signal to tune to.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Wed May 14  7:57 , Lee Buller  sent:

>
>The Auto-Spot feature is very cool and has been excellent for me.  I have not 
>yet 
loaded the new release, but I want to comment on what my experience has been.
>
>My hearing has diminished from 300 Hz all the way to 15,000 Hz and beyond.  IN 
>fact, I 
peak at around 2,000 Hz and roll off some 60 db at 4,500 Hz.  The low end of 
the 
spectrum suffers as well as I roll of around 800 Hz some 20 db.  I have very 
little 
high end unless I crank it up and the walls start vibrating.  Hearing Aids 
would 
correct all this, but at $3,000 plus....well, you get the picture.  
>
>So, I always spot CW signals wrong because of my hearing defects.  I have a 
>tendency 
to be high and the station does not hear me.  I have to remember to tune lower 
and to a 
softer sound of 600 Hz or so.  This has proven to be a problem during CW 
contesting and 
I have to really work at compensating for my hearing loss below a thousand Hz.  
The 
Auto-Spot feature changed all that.  Just very cool.  I want to see how it 
works in a 
contest.
>
>So, protect your hearing and do not get "old."  Use hearing protection while 
>mowing 
the lawn, going to rock concerts (what a fun time that was), listening to your 
Iron 
Butterfly LP (HE HE HE); use reasonable volume when working the contests, and 
while 
working in noisy environments (25 years in broadcasting using headphones).
>
>73
>Lee - K0WA
>
>
>
>In our day and age it seems that Common Sense is in short supply.  If you 
>don't have 
any Common Sense - get some Common Sense and use it.  If you can't find any 
Common 
Sense, ask for help from somebody who has some Common Sense.  Is Common Sense 
divine?
>_______________________________________________
>Elecraft mailing list
>Post to: [email protected]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to