K3 Owners, In order to download and install new firmware do I need only pin 2 (RXD), Pin 3 (TXD), and Pin 5 (Common or SER C) connected in my serial interface cable from the computer?
The schematic shows, in addition to the above, some handshake connections: Pin 7 (RTS) and Pin 4 (DTR). The reason I am asking is I plan to use the Rigblaster Pro to interface with my K3 and Not sure that the serial pass through connection contains the Pin 7 and 4 connections. I have already got successful remote operation with my K2 using the Rigblaster Pro. I am aware that the K2 doesn't use any handshake (Pin 4 and 7) connections for serial interface. Thanks in advance. 73 Dave KD1NA _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
