Mike,
While the RF Probe will not solve the problem, it will detect whether
the crystal is the problem or not. At the time of the initial
suggestions, he did not have access to another receiver, and under those
conditions, the use of an RF Probe is the easiest way to make some
determinations about the source of the problem.
You are correct, if another receiver that can tune to 22 MHz is
available, that is the quickest way to check whether the crystal
oscillator is operating.
73,
Don W3FPR
Mike Morrow wrote:
Curt wrote:
I'm wondering if the trouble with your K1 on 20M is the 22 mHz
premixer crystal is bad.
That's exactly what I was thinking, and was wondering why in the scores
of earlier replies there had been no suggestion of this. The RF probe
won't solve this very likely cause!
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
