Hi - if this post is not acceptable - mods feel free to delete - my purpose is not to offend or 'sell'
This is not directly related to the K3 - which I am very happy with - but TRX works with the K3 AND my SteppIR - so thought it might be of interest... also - my next project is to get Laurent F6DEX to FULLY - and I mean FULLY implement all the possible controls of the K3. so: Laurent, the author of 'TRX-Manager' just made the following post on the TRX-Manager Yahoo group: http://groups.yahoo.com/group/TRX-Manager/ "TRX-Manager V 4.2.1 is ready. Main change is addition of a comprehensive SteppIR control Interface (STEPPIR protocol). Please see the help for setup (important information to be read). Special thanks to John VE3NFK for testing and Jim @ SteppIR for support." www.trx-manager.com This new addition to TRX gives you full control of the SteppIR - beam and vertical from your computer screen - including 'home' and 'calibrate' at a button press - something I have wished for a long time. It is not perfect - as the SteppIR RS-232 protocol is not a complete set because there is not enough memory left to get it all in - but it works very well. TRX is not free - but does have a 30 day trial. Disclaimer: I have no financial interest in TRX - but Laurent is a friend and I am a Alpha tester. 73 John VE3NFK -- View this message in context: http://www.nabble.com/Of-possible-interest-Announcement---SteppIR-FULL-control-with-TRX-Manager-tp17285925p17285925.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
