Thanks to the patient assistance from Don, W3FPR K2 6442 was on the air last night (for the first time) with N7CMJ, Less of Evergreen, MT. We initiated our contact on 2m to coordinate and then made contact on 10m and 15m. According to N7CMJ my signal was 5/5 with 5 watts. His frequency readout was 28.499.09 to my 28.500. I guess that is good enough for now. All I have left to do is install the 60m accessory and the KIO2 (looks intimidating).
All was not perfect however. Just a couple of problems cropped up. 1. I am getting a flash of HiCur occasionally when I transmit. The Current setting is at the recommended 2.0 and I was only running 5 Watts. 2. According to N7CMJ the Elecraft mic sounded great. Not so with my Heil Traveler Headset. For reasons unknown, it caused a "thumping" or pulsing sound in the receiving station. I do not know what this could be and neither did Less. Per Heil instructions, I am using the same adapter as that used by Kenwoods. Suggestions more than welcome on the above issues. Again, thanks to Don, Less and also Gary (W7GFB) for all the help getting on the air. Chris K7CJA K2#6442 P.S. I am hoping to get on the MT net this AM. -- View this message in context: http://www.nabble.com/K2-6442-ON-THE-AIR-tp17302568p17302568.html Sent from the K2 mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
