Hi Paul,
this is what I discovered and described on
http://www.zerobeat.net/smf/index.php?topic=215.0
There are some possibilities that later after more important changes
there will be some change in firmware to set KEY OUT as "pure" PTT out
port. (I hope so).
For many oparators running special and complex system is RX/TX
switching by hitting the Key not so comfortable :-(
Now I have ready small switchbox to activate PTT and Key (using K3 as
EME main tranceiver on 1296MHz) to avoid unwanted keyng of all the
line of relays in transverter(-s) and mast preamplifiers.
During digital mode there is PTT via RS232 port running but is better
to remove Key at all from the RIG :-)
73!
Lexa, ok1dst
K3/10 #727
Paul W5DM napsal(a):
Is there any setting in the K3. using an external CW keyer and PTT, that
can be used to make the key inactive while in the receive mode? As is,
while the PTT function at first glance seems to work normally, it is, in my
opinion, incomplete in that closing the key while receiving turns on the
transmitter. For reasons that are both personal and compelling I will
control the transmit/receive function completely by a manual send/receive
switch of some kind.
I can accomplish what I want by using a double pole switch, one pole for the
normal PTT and the other pole in the key line. I am trying to save myself
the trouble of installing such a switch--getting lazy in my old age.
Any help will be appreciated.
73 Paul W5DM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
