> Thanks for the info Joe - unfortunately I don't have the FAS-1-4R You don't need the FAS-1-4R for this. The "K3" column is the DB15HD Accessory plug on the K3. The FL-7000 is the 9 pin Molex connector on the FL-7000. They should work very well together.
73, ... Joe, W4TV > -----Original Message----- > From: charles [mailto:[EMAIL PROTECTED] > Sent: Friday, May 23, 2008 1:52 PM > To: [EMAIL PROTECTED] > Cc: elecraft > Subject: Re: [Elecraft] K3 with Yaesu FL-7000 Linear Amplifier > > > On Friday 23 May 2008 15:27:59 Joe Subich, W4TV wrote: > > The FL-7000 should be a good match to the K3. Try the following > > cable: > > > > K3 FL-7000 > > > > Ground 5,12 1,7 > > "D" 14 2 > > "C" 9 3 > > "B" 3 4 > > "A" 13 5 > > TX GND 10 6 > > INH 7 8 > > > > Be sure to enable TX INH in the K3. You will need to limit the > > K3 power output to prevent overdriving the FL-7000 until the > > negative ALC modification is available for the K3. > > Thanks for the info Joe - unfortunately I don't have the FAS-1-4R > > Charles - M0BIN _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
