Jerry Flanders wrote:
At 10:23 PM 5/25/2008, Lyle Johnson wrote:
<snip>
The AFV and dBV function of the K3 makes it possible to do some pretty
accurate measurements. You can determine MDS, see filter attenuation
and be sure your filter configuration loss compensation values are in
fact correct instead of guessing, etc.
I guess I had better start reading the manuals. Which one tells me how
to do the above?
VFO B Alternate Displays is a topic on page 34 of the Owner's Manual.
Not much info there. Basically, you operate it as I described: get your
reference, in AFV, then switch to dBV. If AGC is off, you'll get
absolute relationships as long as the hardware AGC is not activated. On
the other hand, with AGC on you can determine what the AGC SLP (slope)
control does, etc.
It's pretty much up to your imagination...
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
