Thanks Don, Yeah, the bias was my problem, but you don't get it it by moving the VFO knob, which is what got me confused. You have to tap 2 :).
73 de Joseph Durnal NE3R On Fri, Jun 27, 2008 at 11:13 AM, Don Wilhelm <[EMAIL PROTECTED]> wrote: > Joseph, > > Do you have the menu microphone selection correct? It is the main menu. Go > to the MIC SEL entry and turn VFO A knob until it says FP.L bIAS. That is > what I use for my MD2 and the MH2 should be similar. I run with the Mic > gain set at about 37 and the CMP set to about 24. You could use FP.H bias, > but your mic gain would be quite different than mine. > > 73, > Don W3FPR > > Joseph M. Durnal wrote: >> >> Still having trouble. It does seem to transmit SSB - I enabled the 2 >> tone test and that worked when I pushed the PTT. But it doesn't seem >> that the mic is putting audio into the rig. >> >> I'll need to run SSB for field day, I'd also be happy with suggestions >> on what to do if this mic doesn't work. I have a heil pro set with an >> 8 pin connector, but that doesn't seem to work either. I have an >> alinco and icom hand mic that I could borrow. I also have a foot >> switch. I wonder if I could use the proset by plugging it into the >> back panel w/ RCA, and a foot switch to key it? >> >> Thanks & 73 de Joseph Durnal NE3R >> >> >> On Fri, Jun 27, 2008 at 10:07 AM, Joseph M. Durnal >> <[EMAIL PROTECTED]> wrote: >>> >>> Got my Elecraft MH2 mic this morning, but it doesn't seem to be >>> working the PTT works, but there is no power out when I speak into the >>> it. Any ideas? Now I'll spend some time with my nose in the manual. >>> >>> (I should have probably done my field day prep a little more in advance) >>> >>> Thanks & 73 de Joseph Durnal NE3R > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
