Due to the different levels present between the Line In and the FP or RP mic
inputs you will need to adjust the VOX to a higher level. When I tried this
I had to "almost" set the VOX to max....but not quite.
Why use VOX at all? If you have the radio connected to a computer using a
soundcard program why not utilitze the RS-232 line already connected? You
can do this by setting the PTT-KEY CONFIG menu item and making the correct
DTR/RTS settings in the software you are using.
73
Greg
AB7R
----- Original Message -----
From: "Bruce McLaughlin" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[email protected]>
Sent: Friday, July 04, 2008 6:15 PM
Subject: RE: [Elecraft] I am running PSK 31 need some pointers!
Bring up the main menu and adjust VOX GN. Whatever works OK with your
mike
should be OK for PSK.
Bruce-W8FU
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bill Maddock
Sent: Friday, July 04, 2008 7:08 PM
To: [email protected]
Subject: [Elecraft] I am running PSK 31 need some pointers!
Just got my K3 running psk and I am using VOX to start and stop it -
which seems to work fine - Is there a VOX threshold control so I
don't over drive it? - I will using Digipan with DX4WIN at 14.07015
with marker freq of 1450hz - come and get me!
Thanks and 73,
Bill N4ZI K3 #1059
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
No virus found in this incoming message.
Checked by AVG.
Version: 8.0.101 / Virus Database: 270.4.3/1529 - Release Date: 7/1/2008
7:23 PM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.4.5/1533 - Release Date: 7/3/2008
7:19 PM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
