Hi
This sounds like the mounting pad for the speaker shield. Check the assembly
manual page 46. This pad is usually already installed inside the shield and
you just remove the paper backing and stick it to the back of the speaker.
Elecraft may be now supplying the pad separate from the shield or you may
have an extra one.
Don
--------------------------------------------------
From: "Brad Johnson" <[EMAIL PROTECTED]>
Sent: Saturday, July 05, 2008 1:01 AM
To: <[email protected]>
Subject: [Elecraft] K3 Mystery Part
I just completed the parts inventory of my K3 and the accessories. I'm
pleased to report that with the exception of the 6 kHz filter that is
backordered, all components and hardware appear to be present and
accounted for.
I have one part that doesn't show up on any of my parts lists. It is a
rubber disc approximately 1 inch in diameter and 1/4 inch thick, with an
adhesive backing. It looks like it could be used as a foot for the
chassis, but is not listed as such. .
I quickly glanced through the assembly manual and didn't see a reference
to it. Perhaps I overlooked something?
Can anyone tell me what it is used for?
Thanks and 73,
Brad
AA5CH
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
