Well, while waiting for a s/w install in the radio computer, I thought I'd give this another try.
The nut did not appear loose at all - nor did I observe any slop, but I tightened it with a nut driver anyway and the problem seems to have gone! Thanks again to Don, and hope others find it helpful. Regards, Joel Joel R. Hallas From: Joel R. Hallas [mailto:[EMAIL PROTECTED] Sent: Sunday, July 06, 2008 7:13 AM To: '[email protected]' Subject: K3: More on AF Gain delay Thanks for the suggestion Don, but that wasn't it either. Any other thoughts? >Remove both knobs from the concentric shafts and see if the nut holding >the control to the front panel has loosened. Yes, the pots are fastened >to the board so you might not notice it at end of rotation, but a loose >mounting nut can impart a 'squishy' feel when the knob is rotated >because of the slight flexing. >73, >Don W3FPR Regards, Joel Joel R. Hallas _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
