You don't have to have a filter in FL1 unless you want to transmit on FM, and in that case, you need the 13 KHz FM filter in FL1.
You must set the CW and SSB transmit filter to a 2.7 or 2.8 KHz filter, whatever slot it is in. It's recommended that you put the filters in from widest to narrowest, starting at FL1. However if you have plans for an FM filter alter and an AM filter later, you might start with the 2.7 or 2.8 KHz filter in FL3, for example. Dick, K6KR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Buller Sent: Monday, July 14, 2008 11:05 AM To: Dr. James C. Garland; Elecraft Reflector Subject: Re: [Elecraft] K3 Firmware Bug If I am not mistaken....you have to have a filter in the FL1 slot. The K3 has to transmit through the widest filter....and I think that should be in the FL1 slot. Your Mileage May Vary Lee - K0WA In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
