On Fri, 18 Jul 2008 21:30:25 +0100, Dave G4AON wrote: >For the actual RTTY keying, I use the dc input via the 15 way "D" >connector on the K3 with the single transistor keying circuit from the >MMTTY help file. It is found under "Prepare for FSK". I have a PC with 8 >real serial ports which helps. The K3 is used with "DATA FSK D" mode. I >do not use PTT from a serial port, the MMTTY program commands the K3 to >TX via a Kenwood serial command.
Clarification please, Dave. How many serial connections are you using for the radio? Do you also use a contest logger? Which one? Does it share a serial connection with MMTTY? My experience is that if MMTTY is in use, two serial connections are required, even when the contest logger integrates it well. Are you doing it with one? 73, Jim K9YC _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
