I've just ordered a KXV3 and was pleasantly surprised to find they are
more or less a stock item.
In order to use one with an external receiver simultaneously with the K3
main receiver, it appears necessary to use an external resistive
splitter or better still a hybrid coupler feeding one side back into the
K3 and the other to the external receiver. I wonder if anyone is using
such a set-up and has any thoughts on it. I had rather hoped the RX
output socket was a buffered output from the K3 receive chain but sadly
it isn't.
I also have an Advanced Receiver Products P50VDG 50 MHz pre-amp on order
(http://www.advancedreceiver.com/), again anyone else using one of these
with their K3? It looks easy enough to connect as a direct pre-amp via
the in/out sockets on the KXV3.
73 Dave, G4AON
K3/100 #80
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
