Charles and All,
Any audio buff will tell you that you can substantially enhance a radio by
putting a better speaker on it! That holds true with the K3 as well. I use
a Sounds Sweet external speaker at home, and it does wonders for the audio
out, just like it does on every other radio I own! Actually I don't think
the audio is all that bad with the K3's internal speaker, but it's only a 3$
or $4 speaker, which you can get from Jameco (that's where Elecraft gets
them I think). It certainly isn't "Hi-Fi" however! I guess I don't
understand your point, or why you are making an apples and oranges
comparison.
Dave W7AQK
----- Original Message -----
From: "Charles Harpole" <[EMAIL PROTECTED]>
To: "Stewart Baker" <[EMAIL PROTECTED]>; "Koppendorfer Klaus"
<[EMAIL PROTECTED]>; "Ian Maude" <[EMAIL PROTECTED]>; "elecraft Reflector"
<elecraft@mailman.qth.net>
Sent: Wednesday, August 06, 2008 1:49 AM
Subject: [Elecraft] u want nice audio?
U want to hear nice ham audio?
Listen to an SX-101 with the 12 inch Hallicrafters matching spkr.
Listen to a Collins 75A-4 with its matching speaker.
Otherwise, 3 inch tin is tin and the laws of physics still apply.
73
Charles Harpole
[EMAIL PROTECTED]
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; elecraft@mailman.qth.net
Date: Wed, 6 Aug 2008 09:28:21 +0100
Subject: Re: AW: [Elecraft] Re: K3 Audio
CC:
Is that really so ?
If that's the case, then the design is poor..
73
Stewart G3RXQ
On Wed, 6 Aug 2008 09:32:55 +0200, Koppendorfer Klaus wrote:
did you use the line out ?? The Line Output
transformers of the K3, saturate at normal program levels
try Headphone out on Frontplate and you will see no Harmonic´s
73
OE6KYG
KX1 244
K2 1331
K3 115
-----Ursprüngliche Nachricht-----
Von: [EMAIL PROTECTED] [mailto:elecraft-
[EMAIL PROTECTED] Im Auftrag von Ian Maude
Gesendet: Mittwoch, 06. August 2008 09:27
An: elecraft Reflector
Betreff: Re: [Elecraft] Re: K3 Audio
Bob Cunnings wrote:
If you listen to Sherwood's presentation, you'd hear him state
that
the distortion problem he discusses occurs only when driving a
low
impedance (speaker) load. If driving a high Z load like, say,
powered
speakers, or using headphones, there is no problem.
There is still a bit of a problem on receive audio. This has
been there
for some time and exists in the form of harmonics. The 3rd
harmonic is
quite easy to see and repeatable. I used HRD to show this on
the
waterfall after a conversation with a friend.
You can clearly see the harmonic at..
http://www.gb7mbc.net/docs/K3Audiotrace.doc
73 Ian
So that might explain your observations.
Bob NW8L
On Tue, Aug 5, 2008 at 4:29 PM, Geoffrey Downs
wrote:
Would be interesting to know the detail of what Rob Sherwood
said, but
I
agree with you, Dave. The tx and rx audio on my K3 sounds
cleaner,
brighter
and clearer to me than my now obsolescent FT1000MP Field even
before
applying any equalisation. I use either a headset or a couple
of small
external computer speakers.
73 to all
Geoff
G3UCK
----- Original Message ----- From: "Dave G4AON"
To:
Sent: Tuesday, August 05, 2008 9:55 PM
Subject: [Elecraft] Re: K3 Audio
Bottom line to me is the K3's audio is fine. And no, I'm not
on
commission
from Elecraft!
73 Dave, G4AON
K3/100 #80
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com