Whilst I am waiting for shipping notification of my KRX3, I have a
question on routing.
I have a specific contest application coming up where we will be using
SR2O. The idea is for the 2nd op to be monitoring a band other than the
Run band. We are only allowed one antenna and have designed it such that
the KAT3 will handle all the impedance presented on the various bands. I
had hoped that the K3/KAT3/KXV3/KR3X antenna routing would allow us to
connect the 2nd rx directly to the antenna
and not via the ATU. Studying the manual I can't see how that can be
done. Can anyone confirm this?
If not, I can make up a small relay box which takes a feed off the
antenna input to Ant 1 socket and feeds it to Aux RF on receive and
grounds Aux RF on transmit and I can switch it via the PA PTT switch on
my mHam Keyer. An internal switching solution would be more sophisticated!
Chris G3SJJ
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
