Greetings to all,
Here is the text of a note I sent to k3support. I hope someone has some ideas. On Saturday the 16th I noticed that the ATU gave a higher SWR than bypass when transmitting to a resonant antenna. The difference was small so I thought I would just note it and observe. Today, Sunday the 17th I found that on 14.050 in bypass mode at 14.050 I get a 1.1 to 1 reading but in ATU mode I get higher that 2 to 1 and a HI SWR message. On 7.050 I get 1.0 to 1 in bypass and 1.4 to 1 in ATU mode. This is a change from when the rig was first built on Friday the 8th. Originally if I had 1.1 in bypass I would get 1.0 in ATU mode. Help! I thought I was up and running after a week of problems and now a new one! Any suggestions would be appreciated. Jack _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
