You are right David, The power output indication (in the VFO B area) changes but the actual power out as indicated on the K3 does not. Furthermore, if I go below 12W such that the QRO PA goes out of circuit, the actual power will drop (not sure what to) and will not return to 20W when I increase it.
Apologies for my rather 'blanket' dismissal of your observation! 73 Stephen G4SJP On 17/08/2008 21:34, "Dave G4AON" <[EMAIL PROTECTED]> wrote: > Stephen > > Try, DATA A, audio into K3 via line input, RTTY (or any similar audio > data mode), set power to 20 Watts, go to TX and try to turn up the power > while transmitting. Nothing happens, the power remains at 20W. > > 73 Dave, G4AON > K3/100 #80, f/w 2.23 > > I quite agree David, but I'm surprised that you are saying that the TX power > cannot be changed whilst transmitting, because I certainly can do that on > all modes so far as I can see with the latest beta that you have. > > 73 Stephen G4SJP > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
