Niel Skousen wrote:
I'm installing a used Butternut HF-6v, and the location / elevation
would work with the CPK raised counterpoise. So I'm looking for a
counterpoise kit for a B.Nut HF-6V.. Also, wanting to add 6m, but
that's trivial, unless someone has it sitting around....
You don't need an expensive 'kit'! Just take any old wire and make two
1/4 wavelength radials for each band -- a total of 12 radials. Try to
make them as symmetrical as possible, with the two 40 meter radials
opposite each other, etc.
The ends of the radials must be well-insulated, since even though they
are connected to the coax braid at the center, they will develop
high-ish voltages at the ends.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
