Hi folks,
I just got my K3 in the last couple weeks, and I'm noticing something odd. If I tune into an HF station on SSB (for instance the VFN on 3.947 LSB, or the hurricane net on 14.300), everything sounds beautiful for a minute, then everyone starts to sound as if I've moved off frequency. However, I have not, and no amount of fine tuning will re-zero the other stations. If I power cycle the K3, let it sit a while, then re-power-up, everyone sounds great again, but after some seconds, they go back off into "Donald Duck" land. (I can actually hear it drift slowly away!) Almost seems like a thermal issue vs. some oscillator/filter? Anyone else have this happen? Do I have a defective unit, a setting incorrect, need a software patch? I have re-loaded the unit w/ the latest SW as per elecraft's load utility/web site. The unit SN = 1291 and was built by Elecraft. Any suggestions are welcome! Thanks, Mike Hess N3EAQ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
