This sounds like exactly the same problem I had. Upgrading from 2.22 to 2.23 solved the problem. Worked fine on cw, and on USB bands but on 40/80 LSB no HP output and next to nothing on LP.
I should note that after upgrading the LSB HP problem was fixed but an ATU problem appeared. Redoing the 5 and 50 watt calibration and then the TXMTR GAIN calibration on all bands got the rig to %100 functionality. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WA6L Sent: Thursday, August 28, 2008 3:32 PM To: [email protected] Subject: Re: [Elecraft] K3 SSB on 40M Jack, AE6GC It has been in Aptos for two weeks now. :-( We will see . . . Nick G3RWF wrote: > > Appears to be just 40M. Did you solve your prob? 73 Nick > > WA6L wrote: >> >> >> I had a similar problem with SSB from 30m through 160m. Is your low >> output only on 40? >> >> 73, >> >> John, WA6L >> >> >> >> Nick Henwood wrote: >>> >>> Can't get proper output on 40M SSB. Rig works fine on all other bands. >>> On 40M gives full output on CW but when switched to SSB although the >>> Comp and ALC readings are OK (i.e.as for all other bands) but there is >>> very little RF output. Can't think of anything which is specific to 40M >>> which I have switched on or off. Any ideas please (I don't use SSB >>> much!)? >>> 73 Nick G3RWF >>> _______________________________________________ >>> Elecraft mailing list >>> Post to: [email protected] >>> You must be a subscriber to post to the list. >>> Subscriber Info (Addr. Change, sub, unsub etc.): >>> http://mailman.qth.net/mailman/listinfo/elecraft >>> >>> Help: http://mailman.qth.net/subscribers.htm >>> Elecraft web page: http://www.elecraft.com >>> >>> >> >> > > -- View this message in context: http://n2.nabble.com/K3-SSB-on-40M-tp790785p790858.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
