With 2.32, CW mode doesn't seem to have the correct bandwidth above
1KHz, which is my 2nd-widest filter.
LSB mode provides good bandwidth at 2.8Khz, but in CW mode, it doesn't
offer that same result at 2.8Khz.
I thought perhaps the issue was the center frequency of 600Hz vs 1.5Khz,
and perhaps it is, but when I shift the CW center frequency, I don't get
any more bandwidth. Furthermore, the audio sounds markedly different
when I veer off of 600Hz center by even 50Hz, as if it's selecting a
different xtal filter or something.
If this isn't "as designed" and you can't reproduce this please let me
know and I'll provide .wav file recordings for you to examine on a
spectrum scope.
73 es TNX,
Leigh/WA5ZNU K3#51 recent ECOs for HAGC and CW waveshape
Well, this is why we do beta test....
Revision 2.32, now on our web site, corrects a major problem we
introduced in rev 2.31 and somehow didn't catch during our own
testing. ESSB should once again be functional, and LSB/USB balance in
both normal SSB and ESSB should be improved.
Also note that we're planning to further improve the ESSB passband in
future revisions. At present when you select 4.0 kHz, for example, you
might get a -3 dB cutoff of around 3700 Hz. While this is much wider
than normal SSB, we think we can extend it.
73,
Wayne
N6KR
---
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
