K2VCO wrote: " The center frequency that is displayed is rounded down to the 50 Hz. value below it. But the actual center frequency of the filter matches the pitch so that received signals at the chosen frequency will be peaked."
I read on page 30 of the Rev. D1 manual that as the PITCH control is adjusted, "the peak in response of all crystal filters will track the sidetone pitch; no filter adjustments are needed." However, I'm wondering if the DSP filters also track in the same way, given that the SHIFT function now has a coarser reolution than the PITCH. With regard to the "rounding," of the SHIFT display, it seems that a largest integer, or "floor" function was used to generate the display. This is truncation, not rounding. 73, Chuck NI0C K3 s/n 1061 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
