Unlike the K2, the LCD is pre-mounted on the front panel board and ready for mounting in the front panel assembly as described in the kit assembly manual.
The last front panel board I received "in the bag" as it would be packaged in a kit was late last year. It had no tape on the display. Ron AC7AC -----Original Message----- Mike, It sounds like you could be a good test candidate. It is no more trouble to disassemble and remove it now than it will be later - why don't you see what happens over time and remove it if and when it becomes a problem. I do recall seeing something about a film being removed at Aptos because it was causing confusion among some builders, but I can't remember which film - so there may be no film on yours after all - but my memory may be faulty too. 73, Don W3FPR k4pi wrote: > When assembling SN 1542 I never saw anything about removing the clear > tape > over the display. Anyone know of any problem there might be with > leaving it > attached to the display? I cannot see it now but possibly it might > discolor > with age. 73 Mike K4PI > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
