On K3 #202 with latest firmware and the KRX3, turning the SUB ON,
enabling BSET, tapping XFIL cycles through the three filters that I have
on the SubRX... NOT the main board filters.
73,
Ken K3IU
Geoffrey Downs wrote:
It doesn't on mine. With B Set selected XFIL steps through the filters
in the main rx.
73 to all
Geoff
G3UCK
----- Original Message ----- From: "Lothar Sack" <[EMAIL PROTECTED]>
To: <elecraft@mailman.qth.net>
Sent: Monday, September 22, 2008 5:01 PM
Subject: Re: [Elecraft] Selecting Filters in KRX3
Yes, that is exactly how it works.
Filters of the SUB-RX are changed by XFIL or WIDTH
after selecting BSET.
55
Lothar, DJ8EW
K3 wid KRX3 2,7 + 1,0
Don Wilhelm schrieb:
Roy,
According to the manual, the XFIL button will switch between
filters. Try BSET and then XFIL.
I am not certain that is currently implemented in the firmware, but
it is worth a try.
I cannot try it because I have only one filter and do not have the
KRX3.
73,
Don W3FPR
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com