Hi Pat,
It was me who asked the question, but I can't find the post anywhere.
If you have the KXV3 installed, you can bring your main antenna into the
K3 and then connect the RX Out of the KXV3 to your K2. Better yet, if
you have the KX160 module in your K2, you can use the receive antenna
input (so you don't accidentally key up your K2 into the RX Out port of
the K3).
Off the top of my head, I can't remember if there is anything else you
need to do in the K3 setup to get this to work or not. Maybe someone
else can chime in.
It worked well for me and really is a tribute to the fine receiver in
the K2. For the simple tests I ran, it heard about as well as my K3. But
we can enhance that signal so much easier with the K3 ;-)
Good luck & 73,
Dave W8FGU
Patrick DalPorto wrote:
I am interested in listening to my K2 and K3 at the same time using the same
antenna. I thought there was a post about how to accomplish this but I cannot
seem to locate it. Can anyone point me to the post? or tell me how to do this.
Pat , W8FV
K2 - 257, K3 - 1286
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
