Hi, Just getting K3 going and KAT3 does not tune properly on 7 and 24 MHz. I'm pretty sure it worked earlier today on a 40 m dipole I put up but now it doesn't tune the dipole or a dummy load. When trying to tune the dummy load and checking the L & C I get Ca = Ct=0.66 nF and L=0.75 uH and 2.5:1 SWR. If I change Ca = 0.04 nF and L = 0.1 uH I get 1.0:1 but when hitting tune again the KAT3 goes back to the previous 2.5:1 settings. All other bands except 24 MHz seem ok.
Any thoughts? Thanks, KE7X Fred Cady Fcady at ieee dot org This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
