You folks have got to try the new noise gate. It's awesome! /Rick N6XI
On 9/30/08, wayne burdick <[EMAIL PROTECTED]> wrote: > > > > MCU 2.45 / DSP 1.92, 9-29-2008 > > * TRANSMIT NOISE GATE ADDED: The TX noise gate can be used to suppress > transmitted audio below a certain level, e.g. a noisy fan (not the one on > the K3, of > course). To use the noise gate, locate CONFIG:TX GATE, tap '1' to turn it > ON, > then use VFO A to set the desired threshold. Since there's no visual > indication that > transmit audio is below the threshold, you should adjust it using the > transmit voice > monitor (MON), ideally using headphones. Set the threshold high enough to > cut off > transmit audio due to shack noise, but not so high that it causes your > voice to drop > out too frequently. The TX GATE threshold can be adjusted in TX TEST mode. > >
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
