> ERR TXF message Incorrect transmit filter setting. Unless you have the FM filter installed as FL 1, configured for 13 KHz and selected for FM transmit, you cannot transmit FM. Unless you have the 6 KHz (AM filter) installed, properly configured as 6 KHz, and selected for AM transmit, you can not transmit on AM.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Roy Davis > Sent: Sunday, October 12, 2008 1:50 PM > To: Elecraft > Subject: Re: [Elecraft] K3 Noise Gate > > > Hello All, > > Has anyone experienced the following; > > ERR TXF message - when transmitting on FM and AM modes. > When you key up the message appears, and as long as you hold > the key down, you can transmit. But after releasing the key, > it will not transmit again in the mode. You can reset the > radio by moving to a different mode. > > Is it possible in my inital setup I missed turning on a > parameter? I have looked in the menu, but I do not see where > I made a mistake. > > Thanks, > > Roy - WK4Y > # 01366 > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
