Roger, What is the Mark frequency in MMTTY vs. the Mark Frequency in the K3?
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Roger Marrotte > Sent: Tuesday, October 14, 2008 12:07 PM > To: [email protected] > Subject: [Elecraft] [K3] Trouble with RTTY > > > I've been fooling around with RTTY for a few days on my K3. > It was working fine yesterday. I even made a contact and was > told I was loud and clear, but today I'm having a problem on > receive. The K3 is in DATA mode and set to FSK D. It was in > this mode yesterday. I have the DUAL PB turned on. I'm able > to tune in an S9+ RTTY signal easily and have it decode on > the K3 screen solidly. I have MMTTY (latest version) running > on my computer. When the K3 is in DATA mode (whether DUAL PB > is on or off) the audio from the radio to the computer is > virtually nonexistent. The audio from the K3 speaker is loud > and clear. This is while the K3 is decoding the RTTY > perfectly on it's screen. I have CWT turned on and the LCD > segments are centered. FC says * 1.35 and is not movable. If > I switch the K3 to LSB, the audio to the computer is is now > loud and decodes perfectly in the MMTTY screen. LIN OUT is > set to 15 and seems to be more than enough for MMTTY. I > touch nothing else but the MODE. This didn't happen > yesterday. Yesterday while in FSK D DATA mode, the audio to > the computer remained loud and clear. It's almost as if > today the K3 isn't putting out audio when it is in FSK D MODE > or that the filter is somehow shifted. > > Roger, W1EM > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
