George, Many thanks for the suggestion. After long pondering about this issue: shall I or shall I not get the SSB kit I decided against it. Many years ago I moved to CW only and I feel that CW requirements are different from SSB requirements. E.g. for SSB many prefer the KDSP2 where other prefer the KAF2 when working CW and using headphones.
I also read about some owners having to replace the headphone jack. I have already built the front without the microphone socket and I have ordered a custom made cover plate that will go over both holes and will be attached through the holes from the back (so it can be reverted should I ever desire) Could have glued it to the front but then I would need a spare front. The headphone jack will go to the back and I will put a hefty 6 mm phone plug in there. Plenty of space there, hi hi. 73, Marinus, ZL2ML George Davis-3 wrote: > > Marinus,. > To cover the unused mic socket, get a threaded collar off an old mic lead. > put a black rubber/plastic disc in it and screw it onto the socket. Maked > a neat job. > George. G3ICO > -- View this message in context: http://n2.nabble.com/K2-under-construction-tp1341023p1344025.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
