All has been fine with my K3 until today. The display is indicating "High
SWR" when I transmit on SSB. The KAT3 indicates a 1.0:1 match, but the when I
transmit the swr meter is high and I get the high swr message on the screen.
If I turn it down to 5 watts and send a tone with Digipan, the swr is fine, but
turn it up to 100 watts and the swr is back up. Nothing obvious has changed,
the antenna is 2:1 on my analyzer with no tuner. If I bypass the antenna
tuner, the bar graph meter on the K3 shows about 2:1. But if I switch in the
KAT3 and tune, it indicates 1.0:1 but when I transmit it's high. I've swapped
coax jumpers between the radio and the antenna with no difference. Thanks for
any suggestions.
Rob
NV5E
_________________________________________________________________
You live life beyond your PC. So now Windows goes beyond your PC.
http://clk.atdmt.com/MRT/go/115298556/direct/01/
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
