My 2 TONE output is 53 watts on my PowerMaster meter with K3 power set to 100
watts on LSB and 43 watts on USB. I am using v.2.57 firmware and I thought
both sidebands were supposed to be usable. My filter is 2.7 Hhz with a -.84
offset. With 2 TONE turned ON the MIC control becomes TN1 which can be
adjusted to plus or minus parameters that displays in the VFO B area. I
believe this increases the amplitude of tone #1. Tone #1 is presently set at
0. What control increases the amplitude of tone #2? Why are my sidebands
showing such a difference in power? Could it be the skirt shape of the filter
is different on each side which causes this? I presume the two tone
amplitudes can be adjusted using a scope. Roy Morris W4WFB
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
