Finished building the K2 #6602 together with KAF2 and KNB2. Was easier than expected and certainly easier than bringing my Omni 546-C to life after it had been stored for 28 years.
No serious problems were encountered, only a couple of small ones which came down to operator error of driving the menus. For one the answer was found ont he reflector and for the other I had to write to support and I had a fast reply from Elecraft telling me what to do and why things happened. This support is what makes Elecraft great. Adjusting the reference oscillator and the filters took more time than expected and spectogram was very usefull here. The instructions and write up by N0SS were very usefull and the K2 filter and reference frequency adjustments became next to perfect. I did change the filter bandwidths for CW however to widths more to my liking: 1.3 Khz, 650 Hz, 400 Hz and 250 Hz. Time to get back on the air again, 73, Marinus, ZL2ML -- View this message in context: http://n2.nabble.com/K2---06602-alive-tp1460782p1460782.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
