It works for me. I'm running firmware beta version MCU 2.63 - DSP 1.95. As I crank up the Monitor Level the Switch Tones get louder. (In other words I hold in the Mon/CMP/PWR knob until "MON" followed by its setting number appears and then adjust that setting level and the Switch Tones follow along.) If I reduce the Monitor Tone level to 0 (zero) the Switch Tones can't be heard. Seems to work for SN 1889. 73/Patrick W7TMT
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roy Morris Sent: Friday, November 07, 2008 8:49 PM To: [email protected] Subject: [Elecraft] [K3] Switch Tone Volume I would like to know how the MONitor level is used to change the switch tone volume. When I change the MON level there is no change. I have talked with another K3 owner who also says his MON control does not change his switch tone volume either. We are both using v 2.63 firmware. Maybe we are overlooking something. Please let me know if the switch tone volume can be changed, and if so, how. Presently it is low and not very audible. Thanks. Roy Morris W4WFB
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
