I used exactly that setup with my K3 and a Titan (425) during a guest operation as VE2OJ in the CW Sweepstakes (Winkeyer to key in on the Titan, key out from the Titan to the K3). After the contest I had one report from a local amateur of "choppy" CW, which I interpreted as possibly an indication of some shortening of the CW elements. It didn't seem to be bad enough to hinder copy, as I did not have an unexpected rate of repeat requests, and there were no comments on the keying during the contest.
If I were using that amplifier again in QSK mode I would try to set aside some extra time before the contest to look at the CW on a scope to see whether any keying compensation was called for. 73, Rich VE3KI ----- Original Message ----- From: "Tim Heasman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, November 20, 2008 8:59 PM Subject: Re: [Elecraft] Interfacing K3 to TenTec QSK Amplifiers/AutomaticAntenna Tuner > Hi All, > > Connect a keyer to key in on the Titan and use key out from the Titan to > key the K2. There will be no timing problems doing it that way. > > 73 > > Tim > > gm4lmh > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
