Note, too, that you still have the full 1 ppm accuracy with the optional TCXO.
What method 3 will give you when it's added to the firmware is the ability to dial it in for somewhat better than 1 ppm by inputting the temperature/frequency data. Ron AC7AC -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Sent: Sunday, November 23, 2008 3:25 PM To: Ed White WA3BZT; K3 Elecraft Subject: Re: [Elecraft] K3 Reference Oscillator Ed, Please review your errata sheet that came with the radio. The firmware is not yet ready for this calibration method. Tnx Greg AB7R ----- Original Message ----- From: "Ed White WA3BZT" <[EMAIL PROTECTED]> To: "K3 Elecraft" <[email protected]> Sent: Sunday, November 23, 2008 12:04 PM Subject: [Elecraft] K3 Reference Oscillator > Hi Gang: > Need help insetting up the TCXO 1ppm oscillator. > I was trying to get Method 3 to work in setting up the oscillator. > I can get to the menu CONFIG:REF CAL but when I tap 1 I do not get EWF > xxC. I assume tap 1 is the #1 key on the key pad? Any help will be great. > Ed > WA3BZT > _______________________________________________ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
