Is this really a case that something is broken or is it that the operation needs to be explained better? If you set the BW to a very narrow width, THEN, switch over to adjust the HI and/or LO CUT, things seem to work as I would expect. It appears to me that the HI/LO CUT is associated with the center frequency and not that the LO cut is associated with the HI CUT or vice versa. Since the K3 has a minimum (minimal) amount of front panel controls some of the controls function is counter intuitive.
Rich, KE0X Joe Planisky wrote: > > Up until recently, I had only used the SHIFT/WIDTH functions for > setting the DSP filter parameters. This morning I decided to try the > LO CUT/HI CUT functions. I really don't understand the behavior I'm > seeing and I suspect there's something wrong. > > > -- View this message in context: http://n2.nabble.com/K3---LO-CUT-HI-CUT-bugs-tp1581668p1582877.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
