I was cookin' pretty good yesterday in the kitchen, got that 12lb bird
roasted up just fine and I thought today, Black Friday, I would be just as
good on 20m. And so I thought....
I worked a couple ZS stations among a lot of North American "DX",
thank you, that was fun.
But what sort of made me turn pale was when AC7DX politely and very
respectfully came to my CQ and said that in essence, my SSB was spread
across 10kc 10!? Uh never in my wildest imagination would I thought I
was messing up the band like that.
I turned off the amplifier and the results were nearly the same.
He went on to explain in his Pro3 that he has bank of Rx filters and Tx
filters. I tried to cull from memory that the K3 has a bank of 5 Xtal
filters and they are used both for Rx and Tx. And, that the widest
filter, in my case the 5-pole 2.7 stock filter was where my SSB was going
through on Tx.
So, I need to dial into the collective knowledge here-
What was going on? When I transmit on the K3, SSB (USB in this case) and
my widest filter is 2.7KHz how on earth is my signal getting received 10Kc
wide?
I put the HO-10 scope on and saw a nice trapezoidal pattern, linearity
seems linear enough. I was driving 80W int the SB-200 with new valves
with a 550W-600W output on the tuner.
I've never head a comment like this before and was wondering if anyone had
any ideas.
Thanks,
-jeff
--
Jeff Wandling DE W7BRS K3 #2105 http://w7brs.com/k3
[EMAIL PROTECTED]
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
