Yes, The ICE 419B requires pull to ground so the W9XT or Top Ten decoder will work directly. With four 2.2 - 4.7K pull-up resistors, the W9XT decoder is the "low cost" solution.
73, ... Joe, W4TV > -----Original Message----- > From: Andy Faber [mailto:[EMAIL PROTECTED] > Sent: Monday, December 01, 2008 3:11 PM > To: [EMAIL PROTECTED]; 'John Unger'; 'Elecraft Reflector' > Subject: Re: [Elecraft] ICE 419 interface > > > The TT Yaesu band decoder works fine. > 73, andy, ae6y > > ----- Original Message ----- > From: "Joe Subich, W4TV" <[EMAIL PROTECTED]> > To: "'John Unger'" <[EMAIL PROTECTED]>; "'Elecraft Reflector'" > <[email protected]> > Sent: Monday, December 01, 2008 2:48 PM > Subject: RE: [Elecraft] ICE 419 interface > > > > > > You need some kind of band decoder. However, the W9XT > board (BCD to > > one of 9) will do the job nicely with the proper relay drivers. > > > > 73, > > > > ... Joe, W4TV > > > > > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] On Behalf Of John Unger > >> Sent: Monday, December 01, 2008 8:09 AM > >> To: Elecraft Reflector > >> Subject: [Elecraft] ICE 419 interface > >> > >> > >> I am in the process of connecting my K3 to a Model 419 ICE > bandpass > >> filter. Does anyone have a circuit or schematic of how they > >> interfaced this filter > >> with the outputs on the ACC port on the K3, or do I need a > full-blown > >> solution like the KRC2 band decoder? > >> > >> tnx es 73 - John, W4AU > >> > > > > _______________________________________________ > > Elecraft mailing list > > Post to: [email protected] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
