In my case the K3 is working alone. 73, Trond LA8NHA
-----Opprinnelig melding----- Fra: [email protected] [mailto:[email protected]] På vegne av DOUGLAS ZWIEBEL Sendt: 15 December, 2008 6:00 PM Til: Elecraft Reflector Emne: [Elecraft] K3: the "strange problem" - pinched audio I have ONLY experienced something like this when using my logging program to "drive" the K3. I have never seen this when the computer is turned off and I use the K3 "all by itself." Here is what I did to "solve" the problem when using the computer...with the computer / contest software running: Set the VFO A and VFO B settings as I like. Using the K3, toggle the BAND switch (top left of K3) up one band and down one band (to get back to where I started). Now go the next band (either direction) and repeat: Set VFO A and B as you wish, then toggle up/down on band. Now go to the third band and repeat. After doing this for every band, things will "stay put" as I change bands using the computer to drive the changes. I do not know if this is related or not to the "pinched audio" problem, but it sounds close to what has been described. Are you folks using the K3 in stand-alone mode or using a computer to change from VFO A to B, etc? de Doug KR2Q _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
