On 12/15/2008 3:41 PM, K2MK wrote:
The problem was my MixW settings. I had the RTS and DTR set for Always
On. I checked the MixW reflector and found the suggested settings of:
RTS set to PTT
DTR set to CW
MixW now works properly in digital modes and will not erroneously
activate transmit if the K3 is in the wrong mode. It does transmit CW
properly in the MixW CW mode.
YES!! I had the same problem (PTT always asserted) come up
suddenly with the RigBlaster Plus interface to my K2.
I sent the interface back to WestMountain, fearful that the
transistor controlling the PTT output had failed. They
returned it (three weeks later counting round trip shipping)
stating that it was operating correctly and that there may
have been a change in how Win XP handles ports (it started
doing that after several Win XP upgrades were installed).
I changed the setting of the port in MixW to those that you had
posted, and lo-and-behold I was back on the air just in time
for the RTTY contest, which I did not participate in!
-- 73 de K2ASP - Phil Kane
Elecraft K2/100 s/n 5402
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
