I got chance to try the fix recommended by Aptos today
As there is virually no lead length between the end of the windings and the
connections to the pcb, it was a challenge to move the end turns, but by
spreading the turns between the end turns the err vco 00374 no longer
happens
Dave
ww2r
Date: Tue, 9 Dec 2008 18:29:25 -0600
From: <[email protected]>
Subject: Re: [Elecraft] KRX3 Installation ; ERR VCO 00227
To: <[email protected]>
I had a similar issue with mine last weekend, but the error code on the sub
vco was 00374
I swapped the sub and main vco resulting in the error repeating on the main
vco
It appeared to be a board issue. So I called Aptos monday who advised me to
open up the toroid on the vco board and spread the turns slightly.
Been on a road trip since so havent had chance to try yet
Dave
ww2r
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
