Thanks to all those who helped off-list. To summarize, the "missing"
2-56 1/4" screws for the front panel standoffs were located in the VFO
bezel screw pouch which is apparently their normal location.
I guess I just don't equate a standoff with a bezel. Plus the warnings
about damaging bezels by using incorrect screws - I didn't open the
pouches ahead of time to avoid mixing anything up.
Radio Shack carries a 2-56 screw assortment if anyone is ever in need.
In fact I used one of the RS screws as a sacrificial piece when opening
up the screw holes on the faceplate.
All is well and the K3/10 construction resumes after the small road bump.
One final note. When I unsealed the LCD bezel screw pouch, one of the
four screws was obviously longer than the others. Nothing that I can't
fix, but beware of that possibility before you attach the bezel.
Benson
K4GST
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
