So, you think the CONFIG menu doesn't have enough entries? That means
you probably have CONFIG:TECH MD (tech mode) set to OFF. Set it to ON
and stand back ;)
Which brings me to ask "Why wouldn't one just leave his K3 in TECH MD
all the
time? Is there a disadvantage to this?
You might want to leave TECH MD set to OFF so you won't accidentally
change parameters best left at their present values. Most TECH MD
entries are for tests that are used during initial calibration or
troubleshooting. Others enable features that are less-often used, and
if turned on unintentionally might cause confusion.
The owner's manual has full descriptions. I do encourage everyone to
read the entire menu section, just so you'll know what you can do with
the rig. (Or, if you don't like to read manuals, just go to each one in
turn and tap DISP to get the short version.)
The latest firmware includes some menu entries not yet documented in
the manual. I'll post an updated list of these when I get a chance.
73,
Wayne
N6KR
---
http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
