Doug,
You are testing the regulation capability of your power supply.
I would say that is fairly normal - most of the drop will occur in the
initial part of the I-V output curve for the PS, then will flatten out
as the current becomes greater.
You are indicating a regulation of 3.7% over that current draw range
which is quite good.
73,
Don W3FPR
DOUGLAS ZWIEBEL wrote:
After reading the recent comments on POWER OUT, I decided to check mine.
Using the voltmeter on the K3....
Zero power out: 13.6v
5 watts out: 13.3v
100 watts out: 13.1v
The drop from 13.6 to 13.1 for 100w doesn't seem so bad. But why the
drop when running only 5 watts out...seems out of line compared to the
100w level drop.
Does the 5 watt output V drop seem right to you? Comments?
PS is 25-30 year old Astron RS35A
Thanks,
Doug KR2Q
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com