Manolo, You simply connect the PR6 to the RX IN/OUT on the KXV3. To use it just tap the RX ANT button. On RX your signal path will go from ANT1 or ANT2 as selected to the RX OUT, through the PR6 and back in through the RX IN. On TX of course it just goes out to the antenna you have selected.
Make sure you set up the PR6 per the instructions. 73 Greg AB7R -----Original Message----- From: [email protected] [mailto:[email protected]]on Behalf Of EC7ANC Manolo Sent: Tuesday, December 23, 2008 2:40 PM To: [email protected] Subject: [Elecraft] PR6 use with 1 antenna Good evening elecrafters, As I only have one antenna for 6 meters, I wonder how I could use the PR6 for TX and RX with that antenna? Merry Christmast to the group. Manolo EC7ANC
_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
