Hi Dick, I tested it again and it is switching to ANT1 properly. When it changes bands you can hear the receiver noise on the selected antenna and then the utility switches to the port with the dummy load. What has happened a couple of times is that the utility sees a high swr and then throws an error. I'm wondering if a little more delay between switching to the dummy port and applying power might be good in case it is an issue with the antenna switching in the K3. Again, GREAT utility and if I can help in any way, please don't hesitate to call. Cheers and Happy New Year. Fred
Fred Cady fcady at ieee dot org > -----Original Message----- > From: Dick Dievendorff [mailto:die...@comcast.net] > Sent: Wednesday, December 31, 2008 4:05 PM > To: Cady, Fred; 'BigAlT'; elecraft@mailman.qth.net > Subject: RE: [Elecraft] Auto TX Gain calibration error > > That is strange. I thought I switched to the antenna you've > selected in the > wizard for every band and restore it to what it was before. > > I've been doing most of my testing with the Dummy Load on AN2 > and the "real" > antennas on ANT1. > > 73 de Dick, K6KR > > > -----Original Message----- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Cady, Fred > Sent: Wednesday, December 31, 2008 2:52 PM > To: BigAlT; elecraft@mailman.qth.net > Subject: RE: [Elecraft] Auto TX Gain calibration error > > Thanks Al, that did it. > I did discover maybe another little glitch. I have an 18 MHz > antenna on > ANT2 and the AUTO config seemed to use that instead of the dummy on > ANT1. > Great utility, thanks. > Fred > > > Fred Cady > fcady at ieee dot org > > > -----Original Message----- > > From: elecraft-boun...@mailman.qth.net > > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of BigAlT > > Sent: Wednesday, December 31, 2008 12:13 PM > > To: elecraft@mailman.qth.net > > Subject: Re: [Elecraft] Auto TX Gain calibration error > > > > > > Do you have Config:Tech MD turned ON ?. It's necessary for it > > to be on ( a > > small bug in this version of the utility which will be fixed > > in the next > > release ) > > 73 > > Al > > WB6HPF > > > > Cady, Fred wrote: > > > > > > Hi all, > > > Have installed (and re-installed) firmware version 2.76 and > > the new K3 > > > utility to do the auto tx gain. I get the following error: > > > 'Unexpected response "d...@nqr@008**;" to "DS;". State 41' > > > > > > Must have something wrong in my config or something. > > > Anybody else seeing this or have any suggestions? > > > Thanks. > > > Fred > > > KE7X > > > > > > Fred Cady > > > fcady at ieee dot org > > > This email and any files transmitted with it are > > confidential and intended > > > solely for the use of the individual or entity to whom they > > are addressed. > > > If you have received this email in error please notify the > > system manager. > > > This message contains confidential information and is > > intended only for > > > the individual named. If you are not the named addressee > > you should not > > > disseminate, distribute or copy this e-mail. > > > > > > > > > _______________________________________________ > > > Elecraft mailing list > > > Post to: Elecraft@mailman.qth.net > > > You must be a subscriber to post to the list. > > > Subscriber Info (Addr. Change, sub, unsub etc.): > > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > > > Help: http://mailman.qth.net/subscribers.htm > > > Elecraft web page: http://www.elecraft.com > > > > > > > -- > > View this message in context: > > http://n2.nabble.com/Auto-TX-Gain-calibration-error-tp2096956p > > 2096978.html > > Sent from the Elecraft mailing list archive at Nabble.com. > > > > _______________________________________________ > > Elecraft mailing list > > Post to: Elecraft@mailman.qth.net > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > This email and any files transmitted with it are confidential > and intended > solely for the use of the individual or entity to whom they > are addressed. > If you have received this email in error please notify the > system manager. > This message contains confidential information and is > intended only for the > individual named. If you are not the named addressee you should not > disseminate, distribute or copy this e-mail. > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com